Troubleshooting When Using the Copy Function
18
2
When Memory Is Full
This section describes likely causes of and possible solutions for problems relat-
ed to full memory.
Message Cause Solution
Memory is full.
[Print] scanned
orig., [Clear]
to cancel/clear
memory.
The scanned originals exceeds the
number of pages that can be
stored in memory.
Press [Print] to copy scanned orig-
inals and cancel the scanning da-
ta. Press [Clear] to cancel the
scanning data and not copy.
Press [Resume] to
scan and copy re-
maining originals.
The machine checks if the remain-
ing originals should be copied, af-
ter the scanned original has been
printed.
To continue copying, remove all
copies, and then press [Resume].
To stop copying, press [Stop].
To Next Page
Loading...
