67
6. Adding Paper and
Replacing Toner
This chapter describes troubleshooting procedures that are applicable to all the
machine's functions.
Loading Paper
This section describes what to do when paper runs out and needs reloading.
CAUTION:
Note
❒ Be sure to select the paper size with User Tools and the paper size selector. If
you do not, misfeeds might occur.
❒ Straighten curled or warped paper before loading.
❒ For paper types and sizes, see “Recommended Paper Sizes and Types”,
About This Machine.
❒ To load paper in the bypass tray, See “Copying from the Bypass Tray”, Copy
Reference.
Loading Paper into the Paper Trays
This procedure explains how to load paper into the paper trays.
A Pull the paper tray out slowly until it stops.
B Press the release lever and, without letting go of the lever, slide the end
fence.
• When loading paper, take care not to trap or injure your fingers.
ZENY380E
To Next Page
Loading...
