Troubleshooting When Using the Scanner Function
62
5
No valid dest.
lists. Check the
settings or the
server status.
The authentic settings for the de-
livery server are incorrect.
Check that the delivery server is
on and the authentic settings for
the delivery server are correct.
Sending has
failed. Press
Job Information
key to check the
status.
Sending has failed. Press the
{
Job
Information
}
key to check the status.
Try the operation once more.
If the message is still shown, the
network may be crowded. Con-
tact your network administrator.
Use the Job Information screen to
check for the file where the prob-
lem occurred. See “Confirmation
Displays”, Scanner Reference.
Out of paper.
Set paper on the
tray.
No paper is loaded in the speci-
fied paper tray.
Load paper of a size that is listed
in the message.
Check the reso-
lution and reset
nnn original(s)
(A figure is placed at
nnn.)
The scanned original exceeded
maximum data capacity.
Specify the scan size and resolu-
tion again. Note that it may not be
possible to scan very large origi-
nals at a high resolution. See “Rela-
tionship between Resolution and
Scan Size”, Scanner Reference.
Exceeded max.
data capacity
Check resolu-
tion and Start.
The scanned data exceeded maxi-
mum data capacity.
Specify the scan size and resolu-
tion again. Note that it may not be
possible to scan very large origi-
nals at a high resolution. See “Rela-
tionship between Resolution and
Scan Size”, Scanner Reference.
Exceeded max.
page capacity.
Do you want to
send the scanned
data?
The number of scanned pages ex-
ceeded maximum page capacity.
Select whether to send the data so
far.
Message Cause Solution
To Next Page
Loading...
