Sending Scan Files by Scan to Folder
62
2
Specify the path by browsing to a destination folder
Use the following procedure to specify a destination folder path by browsing
computers on the network.
A Press [Dest.:].
B Select [SMB], and then press the {OK} key.
C Press [Browse Network], and then press the {OK} key.
A list of domains or work groups on the network appears.
D Select the domain or workgroup that includes the destination folder you
want to specify, and then press the {OK} key.
E Select the destination computer.
If you cannot find the destination computer, press the {U} or {T} key. Select
the computer, and then press the {OK} key. The computer folder opens. Press
[Up] or the {Escape} key to go up one level.
To Next Page
Loading...
