Various Scan Settings
98
5
Original Setting
This section explains the settings for scanning one-sided or two-sided originals.
Important
❒ This function is not available unless ARDF is installed.
A Press [Options].
B Press the {U} or {T} key to select [Original Setting], and then press the {OK} key.
C Select [1 Sided Original] to scan one-sided originals, and then press the {OK}
key. Select [2 Sided Orig.(T to T )] or [2 Sided Orig.(T to B )] to scan two-sid-
ed originals, and then press the {OK} key.
The following table explains the relationship between the page opening ori-
entation and control panel selection key.
"Programmed" appears, and then the Send Options screen reappears.
D Press the {Escape} key.
Page opening orientation Control panel key
2 Sided Orig.(T to T )
2 Sided Orig.(T to B )
To Next Page
Loading...
