Sending Scan Files by Scan to Folder
70
2
Specify the path by browsing to a destination folder
Specify the path by browsing to the destination folder in an NDS tree or on a
NetWare Bindery server.
A Press [Dest.:].
B Select [NCP], and then press the {OK} key.
C Select the connection type, and then press the {OK} key.
Select [NDS] to specify a folder in the NDS tree. Select [Bindery] to specify a
folder on the NetWare Bindery server.
D Press [Browse Network], and then press the {OK} key.
A list of NetWare Bindery servers or NDS trees on the network appears.
E Select the NDS tree or NetWare Bindery server that contains the required
destination folder, and then press the {OK} key.
A list of NDS contexts or NetWare Bindery server volumes appears.
To Next Page
Loading...
