Other Printing Problems
69
4
Images are printed in
the wrong orienta-
tion.
The feed orientation
you selected and the
feed orientation se-
lected in the printer
driver's option setup
might not be the
same.
Set the machine's feed orientation and the
printer driver's feed orientation accordingly.
See the printer driver Help.
There is considerable
delay between the
print start instruction
and actual printing.
“Sleep mode” might
be set.
The machine requires time to warm up if it has
been in “Sleep mode”. In [System Settings], un-
der [Timer Settings], select [Auto Off Timer], and
then specify “Sleep mode”.
There is considerable
delay between the
print start instruction
and actual printing.
Processing time de-
pends on data vol-
ume. High volume
data, such as graph-
ics-heavy documents,
take longer to process.
If the data-in indicator is blinking, data has been
received by the printer. Wait for a moment.
Making the following setting on the printer
driver may reduce the computer's workload.
❖ PCL 5e/6
Select the lower value for [Resolution] on
the [Print Quality] tab in the printer proper-
ties dialog box.
❖ PostScript 3
Select the lower value in Resolution. The
location of this setting is given below. If
your operating system is Windows, select
[Optimize for Speed] in [PostScript Output Op-
tion]. [PostScript Output Option] is located as
follows:
• Windows 2000/XP/Vista, Windows
2003 Server
[PostScript Output Option] in [PostScript
Options] on [Advanced...] on [Layout] tab
in the printing preferences dialog box.
• Mac OS 9.x
[Printer Specifications] in the print dialog
box.
• Mac OS X
[Set 3] tab in [Printer Features] in the print
dialog box.
❖ RPCS
•On the [Print Quality] tab, select [Speed]
in the [Print priority] area.
•On the [Print Quality] tab, open the
[Change User Settings...] dialog box, and
then, on the [Image Adjustments] tab,
specify a lower value for [Resolution].
To enable [Change User Settings...], select the
[User settings] check box.
See the printer driver Help.
Problem Cause Solution
To Next Page
Loading...
Need help?
General
