12
❖ Initial Settings
Reference
“Facsimile Features”, General Settings Guide
Paper Tray Use this function to print fax documents re-
ceived from programmed senders and fax
documents from other senders, using differ-
ent paper trays.
Specify Tray for Lines Specify a paper tray for each line (telephone,
Internet Fax, IP-Fax).
Folder Transfer Result Report
You can set whether the Folder Transfer Result
Report is transmitted to the specified e-mail
address, when folders are programmed as the
forwarding destinations to which documents
are sent from all senders or Special Senders.
Memory Lock Reception When you switch Memory Lock on, received
documents are stored in memory and not
printed automatically.
Function name Description
Parameter Setting User Parameters allow you to customize var-
ious settings to suit your needs.
Parameter Setting: Print List Prints a list to see the current User Parameter
settings.
Program Closed Network Code Register an ID required for Closed Network
communication.
Program Memory Lock ID Program a Memory Lock ID to be entered be-
fore printing documents when the Memory
Lock function is activated.
Internet Fax Settings You can select to display the Internet Fax
icon or not.
Select Dial / Push Phone Use this function to select a line type when
the machine is connected to a G3 analog line.
Program Fax Information
Program information to be shown on the display
of the other machine and printed as a report.
Enable H.323 Specify whether or not H.323 is used for IP-
Fax transmission.
Enable SIP Specify whether or not SIP is used for IP-Fax
transmission.
H.323 Settings Set the IPv4 address or host name, and alias
telephone number of the gatekeeper.
SIP Settings Set the SIP server's IPv4 address or host
name, and SIP user name.
Program / Change / Delete Gateway Register, change, or delete the gateway used
for transmission to IP-Fax.
Menu Protect
Using Menu Protect, you can prevent unau-
thenticated users from changing the user tools.
Function name Description
To Next Page
Loading...
