5
User Tools Menu (Copier and Document 
Server Features)
This section describes items that can be specified on the copier initial screen.
Copier initial screen can be displayed by pressing the {User Tools/Counter} key.
For more information about how to set up these items, see General Settings
Guide.
❖ General Features
Item Description
Auto Image Density 
Priority
You can set whether Auto Image Density is “On” or “Off” when 
the machine is turned on, reset, or modes are cleared.
Copy Quality You can adjust the copy quality level for each original type.
Image Density You can adjust the image density level for each original type.
Original Orientation in 
Duplex Mode
You can set the original orientation when making two-sided copies. 
Copy Orientation in 
Duplex Mode
You can set the copy orientation when making two-sided copies. 
Max. Copy Quantity The maximum copy quantity can be set between 1 and 999.
Auto Tray Switching If you load paper of the same size in two or more trays, the machine 
automatically shifts to the other when the first tray runs out of pa-
per (when Apply Auto Paper Select is selected.) This function is 
called “Auto Tray Switching”. This setting specifies whether to use 
Auto Tray Switching or not. 
Paper Display You can choose to have the available paper trays and sizes shown 
on the initial display. 
Original Type Display You can have the original types shown on the initial display.
Tone: Original Remains The beeper (key tone) sounds if you forget to remove originals after 
copying. 
Job End Call You can choose whether or not the beeper sounds when copying is 
complete.
Connect Copy Key 
Display
You can specify whether or not to display the key for Connect 
Copy.
Switch Original Counter 
Display
You can select the original counter display.
Customize Function: 
Copier
You can assign up to six frequently-used functions to Copy Func-
tion keys.
Customize Function: 
Document Server Storage
You can assign up to six frequently-used functions to Document 
Server Storage keys.
Customize Function: 
Document Server Print
You can assign up to six frequently-used functions to Document 
Server Print keys.