Where to Put Your Machine
127
8
Power Connection
The following describes power supply.
WARNING:
WARNING:
CAUTION:
CAUTION:
• Make sure the plug is inserted firmly in the wall outlet.
• Voltage must not fluctuate by more than 10%.
• The wall outlet shall be installed near the machine and shall be easily accessi-
ble.
• Connect the machine to the power source specified on the inside front
cover of this manual and do not use any other power sources. Connect
the power cord directly to a wall outlet and do not use an extension
cord. Power sources not specified on the inside front cover of this
manual and extension cords are electric shock or fire hazards.
• Power cords that are damaged, broken, modified, trapped under heavy
objects, pulled hard, or bent severely are electric shock and fire haz-
ards.
• If the power cord is damaged (exposure of the core, disconnection,
etc.), contact your service representative to change a new one. Oper-
ating the machine with a damaged power cord may cause an electric
shock or fire.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• To disconnect the power cord, pull it out by plug. Do not drag the cord itself.
Doing so may result in damage to the cord, leading to fire or electric shock.
To Next Page
Loading...
