6
❖ Reproduction Ratio
❖ Edit
Item Description
Shortcut R / E You can register up to three frequently used Reduce/Enlarge ra-
tios other than the fixed Reduce/Enlarge ratio and have them 
shown on the initial display.
R / E Ratio You can specify the enlargement and reduction ratios that appear 
if [Reduce / Enlarge] is pressed on the copier screen.
R / E Ratio Priority You can set the ratio with priority when [Reduce / Enlarge] is 
pressed.
Ratio for Create Margin You can set a Reduce/Enlarge ratio when registering Create Mar-
gin in a shortcut key. 
Item Description
Front Margin: Left / Right You can specify left and right margins on the front side of copies in 
Margin Adjustment mode.
Back Margin: Left / Right You can specify left and right margins on the back side of copies in 
Margin Adjustment mode.
Front Margin: Top / Bottom
You can specify top and bottom margins on the front side of copies 
in Margin Adjustment mode.
Back Margin: Top / Bottom
You can specify top and bottom margins on the back side of copies 
in Margin Adjustment mode.
1 Sided→2 Sided Auto 
Margin: TtoT
In 1 sided to 2 sided Duplex mode, you can specify the margins on 
the back side. The margin is set to the same value of “Back Margin: 
Left / Right”.
1 Sided→2 Sided Auto 
Margin: TtoB
In 1 sided to 2 sided Duplex mode, you can specify the margins on 
the back side. The value set for “Back Margin: Top / Bottom” is 
used.
Erase Border Width You can specify the width of the erased border margins with this 
function. 
Erase Original Shadow in 
Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1" 
boundary margin around all four edges of each original.
Erase Center Width You can specify the width of the erased center margins with this 
function.
Front Cover Copy in 
Combine
You can make a combined copy on the front cover sheet when you 
select the Front Cover mode.
Copy Order in Combine You can set the copy order in Combine mode to Left to Right or 
Top to Bottom.
Orientation: Booklet, 
Magazine
You can select the orientation of copies to open when using Booklet 
or Magazine mode.
Copy on Designating 
Page in Combine
You can specify whether to make a combined copy on the inserted 
slip sheets in Desig./Chapter mode.
Image Repeat Separation 
Line
You can select a separation line using the Image Repeat function 
from: None, Solid, Broken A, Broken B, or Crop Marks.
Double Copies Separation 
Line
You can select a separation line using the Double Copies function 
from: None, Solid, Broken A, Broken B, or Crop Marks.