Problem Cause Solution
A solid line is printed as a
dashed line or appears
blurred.
Dither patterns do not match. PostScript 3
On the printer driver's [Advanced]
tab, change the [Dithering:] setting.
RPCS
On the printer driver's [Print
Quality] tab, open the [Change
User Settings...] dialog box, and
then, on the [Image Adjustments]
tab, change the [Dithering:] setting.
See the printer driver Help.
Fine lines are fuzzy, of
inconsistent thickness, or do
not appear.
Super fine lines have been
specified in the application.
PostScript 3
On the printer driver's [Advanced]
tab, change the [Dithering:] setting.
RPCS
On the printer driver's [Print
Quality] tab, open the [Change
User Settings...] dialog box, and
then, on the [Image Adjustments]
tab, change the [Dithering:] setting.
See the printer driver Help.
If the problem continues after you
change the dithering settings, use the
settings of the application in which the
image was created to change the
thickness of the lines.
4. Troubleshooting When Using the Printer Function
94
To Next Page
Loading...
