7. Enter the server name, and then press the [OK] key.
Enter the IPv4 address or host name.
8. Select [Authentication Type] using [ ] or [ ], and then press the [OK] key.
9. Select the authentication system for external authentication using [ ] or [ ], and then press
the [OK] key.
Select an available authentication system.
10. Select [Domain Name] using [ ] or [ ], and then press the [OK] key.
11. Enter the domain name, and then press the [OK] key.
You cannot specify a domain name under an authentication system that does not support domain
login.
3. Users/Authentication and Its Application
80
To Next Page
Loading...
