*1
Simultaneous operations are only possible after the preceding job documents are all scanned and [New Job]
appears.
*2
You can scan a document after the preceding job documents are all scanned.
*3
Simultaneous operation becomes possible after you press [New Job].
• If the machine is capable of executing multiple functions simultaneously, specify which function should
have priority in “Print Priority”. This setting is factory-preset to “Display Mode”. For details about Print
Priority, see “System Settings”, General Settings Guide.
• While printing is in progress, scanning a document using another function may take longer than usual.
When a Job Is Not Performed
19
To Next Page
Loading...
