Other Printing Problems
This section describes likely causes of and possible solutions for problems that can occur when printing
from a computer.
When you cannot print clearly
Problem Cause Solution
The printed image is faded
over the entire page.
When is blinking, toner is
beginning to run out.
Add toner. See p.83 "Adding Toner".
The printed image is faded
over the entire page.
The paper is damp. Use paper that has been stored in the
recommended temperature and
humidity condition. See “Paper
Storage”, About This Machine.
Parts of images are not
printed.
The paper is damp. Use paper that has been stored in the
recommended temperature and
humidity condition. See “Paper
Storage”, About This Machine.
The printed image is faded
over the entire page.
The paper is unsuitable. Use recommended paper. Printing on
coarse or treated paper might result in
faint print image. See “Recommended
Paper Sizes and Types”, About This
Machine.
The printed image is different
from the image on the
computer's display.
With certain functions, such
as enlargement and
reduction, image layout
might be different to that on
the computer display.
In the application, change the layout,
character size, and character settings.
The printed font is different
from the image on the
computer's display.
You might have selected to
replace TrueType fonts with
machine fonts in the printing
process.
To print a font similar to that of the
computer display, open the [Change
User Settings...] dialog box on the RPCS
printer driver's [Print Quality] tab, and
then, on the [Misc.] tab, select the
[Change methods to extract TrueType
fonts] check box.
White lines appear. When is blinking, toner is
beginning to run out.
Add toner. See p.83 "Adding Toner".
Other Printing Problems
53
To Next Page
Loading...
