Problem Cause Solution
Fine lines are fuzzy, of
inconsistent thickness, or do
not appear.
Super fine lines have been
specified in the application.
On the RPCS printer driver's [Print
Quality] tab, open the [Change User
Settings...] dialog box, and then, on the
[Image Adjustments] tab, change the
[Dithering:] setting. See the printer driver
Help.
If the problem continues after you
change the dithering settings, use the
settings of the application in which the
image was created to change the
thickness of the lines.
When paper is not fed properly
Problem Cause Solution
Paper is not fed from the
selected tray.
When you are using a
Windows operating system,
printer driver settings override
those settings using the
display panel.
On the RPCS printer driver's [Setup] tab,
in the [Paper source tray:] list, select the
desired input tray.
Images are printed at a slant. The cut paper tray's side
fences might not be locked.
Check the cut paper tray's side fences
are locked. See p.81 "Changing the
Paper Size".
Images are printed at a slant. The paper is feeding in at a
slant.
Load the paper correctly. See p.77
"Loading Paper".
Misfeeds occur frequently. The number of sheets loaded
exceeds the capacity of the
machine.
Load paper only as high as the upper
limit markings on the side fences of the
paper tray or bypass tray.
Misfeeds occur frequently. The paper is damp. Use paper that has been stored in the
recommended temperature and
humidity condition. See “Paper
Storage”, About This Machine.
Misfeeds occur frequently. The paper is too thick or too
thin.
Use recommended paper. See
“Recommended Paper Sizes and
Types”, About This Machine.
Other Printing Problems
55
To Next Page
Loading...
