11. Press [Yes].
The machine restarts automatically, and overwriting begins.
12. When overwriting is completed, press [Exit], and then turn off the main power.
Before turning the power off, see “Turning On the Power”, About This Machine.
• During overwriting, the machine cannot be operated.
• If the main power is turned off when Erase All Memory is in progress, overwriting will start again when
you next turn on the main power.
• If an error occurs before overwriting is completed, turn off the main power. Turn it on again, and then
repeat from step 2.
• If you specify to both overwrite and encrypt the data, the data will all be encrypted.
• p.37 "Logging on Using Administrator Authentication"
• p.39 "Logging off Using Administrator Authentication"
• p.163 "Methods of Overwriting"
Suspending Erase All Memory
The overwriting process can be suspended temporarily.
• Erase All Memory cannot be canceled.
1. Press [Suspend] while Erase All Memory is in progress.
2. Press [Yes].
Overwriting is suspended.
3. Turn off the main power.
Before turning the power off, see “Turning On the Power”, About This Machine.
Deleting Data on the Hard Disk
169
To Next Page
Loading...
