2. Press [Change].
3. Specify the range in which [Simple (Limitation)] is applied to “Printer Job Authentication”.
You can specify the IPv4 address range to which this setting is applied, and whether or not to apply
the setting to the parallel and USB interfaces.
4. Press [Exit].
5. Press [OK].
6. Press [Exit].
7. Press the [User Tools/Counter] key.
A confirmation message appears.
If you click [Yes], you will be automatically logged out.
Authentication Information Stored in the Address Book
This can be specified by the user administrator. For details about logging on and logging off with
administrator authentication, see “Administrator Authentication”.
If you have specified User Authentication, you can specify access limits for individual users and groups of
users. Specify the setting in the Address Book for each user.
Users must have a registered account in the Address Book in order to use the machine when User
Authentication is specified. For details about user registration, see “Registering Names”, General Settings
Guide.
2. Authentication and its Application
54
To Next Page
Loading...
