Interface
When administrator authentication has been specified, the settings available to the user depend on whether
or not "Available Settings" has been specified.
• Abbreviations in the table heads
A = Authorized user when Available functions have not been specified.
B = Authorized user when Available functions have been specified.
C = Unauthorized user.
• Abbreviations in the table columns
R/W (Read and Write) = Both reading and modifying the setting are available.
R (Read) = Reading only.
N/A (Not Applicable) = Neither reading nor modifying the setting is available.
Interface Settings
Settings A B C
Network : LAN Type R/W N/A N/A
Ethernet : Network R R N/A
Ethernet : MAC Address R R N/A
USB R/W R N/A
USB Host R R N/A
Parallel Interface
*1
R/W R N/A
Parallel Timing
*1
R/W R N/A
Parallel Communication Speed
*1
R/W R N/A
Selection Signal Status
*1
R/W R N/A
Input Prime
*1
R/W R N/A
Bidirectional Communication
*1
R/W R N/A
*1
The IEEE 1284 interface board option must be installed.
8. Appendix
334
To Next Page
Loading...
