5. Enter the login password, and then press [OK].
"Authenticating... Please wait." appears, followed by the screen for specifying the default.
• If user authentication has already been specified, a screen for authentication appears.
• To log on as an administrator, enter the administrator's login user name and login password.
• If you log on using administrator authority, the name of the administrator logging on appears.
• If you log on using a login user name with the authority of more than one administrator, “Administrator”
appears.
• If you try to log on from an operating screen, "You do not have the privileges to use this function. You
can only change setting(s) as an administrator." appears. Press the [User Tools/Counter] key to
change the default.
Logging off Using Administrator Authentication
If administrator authentication has been specified, be sure to log off after completing settings. This section
explains how to log off after completing settings.
1. Press the [User Tools/Counter] key.
Administrator Authentication
39
To Next Page
Loading...
