7. Configuring the Machine Using the
Control Panel
Basic Operation
There are two main ways to access the machine settings:
• Press the [User Tools] key to access the System or Network settings.
• Press the [ ] or [ ] key to access the Copy, Scan, or Fax settings.
To check which category the function you want to configure belongs to, see page 133 "Menu
Chart".
1. If you want to configure the machine's system settings, press the [User Tools] key.
Otherwise, press the [ ] or [ ] key while "Ready" is displayed on the initial screen of the Copy,
Scan, and Fax settings.
2. Press the [ ] or [ ] key to select the settings you want to use.
For a list of available items, see page 133 "Menu Chart".
131
To Next Page
Loading...
