Checking the System Information
Click [Home] to display the main page of Web Image Monitor. You can check the current system
information on this page.
This page contains three tabs: [Status], [Counter], and [Machine Information].
Status Tab
Item Description
Model Name Shows the name of the machine.
Location Shows the location of the machine as registered on the [SNMP] page.
Contact Shows the contact information of the machine as registered on the [SNMP]
page.
Host Name Shows the host name specified in [Host Name] on the [DNS] page.
Device Status Shows the current messages on the machine's display.
Status
Item Description
Print Cartridge Shows the amount of toner remaining.
Fusing Unit Shows the remaining life of the fusing unit, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Transfer Roller Shows the remaining life of the transfer roller, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Paper Feed Roller Shows the remaining life of the paper feed roller, as "Status OK",
"Replacement Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Paper Tray
Item Description
Tray 1 Shows the current state and paper size/type setting of tray 1.
8. Configuring the Machine Using Utilities
174
To Next Page
Loading...
Need help?
General
