7. Press the [ ] or [ ] key to select [Inactive], and then press the [OK] key.
8. Press the [ ] or [ ] key to select [Manual Config. Address], and then press the [OK] key.
9. Press the [ ] or [ ] key to select [Manual Config. Address], and then press the [OK] key.
10. Enter the machine’s IPv6 address using the number keys, and then press the [OK] key.
11. Press the [ ] or [ ] key to select [Prefix Length], and then press the [OK] key.
12. Enter the prefix length using the number keys, and then press the [OK] key.
13. Press the [ ] or [ ] key to select [Gateway Address], and then press the [OK] key.
14. Enter the gateway address using the number keys, and then press the [OK] key.
15. Press the [User Tools] key to return to the initial screen.
16. If you are requested to restart the machine, turn off the machine, and then turn it back on.
Network Settings
165
To Next Page
Loading...
