• You can press the [Escape] key to exit to the previous level of the menu tree.
•
You can change the machine's default [Reduce/Enlarge] setting to always make photocopies in
the specified ratio. For details, see page 134 "Copier Features Settings".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed. For details, see page 166 "Administrator Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
4. Copying Originals
68
To Next Page
Loading...
