Reading the Configuration Page
The configuration page contains the information shown below.
System Reference
•
Machine ID
Shows the serial number assigned to the printer by the manufacturer.
• Total Memory
Shows the total amount of memory installed on the printer.
• Firmware Version
Shows the version of the printer's firmware.
• Printer Language
Shows the version of the printer language installed in the printer.
• Attached Equipment
Shows "Tray 2" if tray 2 is attached.
• Print Cartridge
Shows the remaining life of the print cartridge.
• Transfer Roller
Shows the remaining life of the transfer roller.
• Paper Feed Roller
Shows the remaining life of the paper feed roller.
• Fusing Unit
Shows the remaining life of the fusing unit.
Paper Input
Shows settings made in the [Paper Input] menu. For details, see "Paper Input Menu".
Maintenance
Shows the settings made in the [Maintenance] menu. For details, see "Maintenance Menu".
System
Shows settings made in the [System] menu. For details, see "System Menu".
PCL Menu
Shows settings made in the [PCL Menu]. For details, see "PCL Menu".
PS Menu
Shows settings made in the [PS Menu]. For details, see "PS Menu".
5. Monitoring and Configuring the Printer
100
To Next Page
Loading...
