Ricoh Aficio SP 3500N - Configuring the POP3 Settings

Item Description
Device E-mail Address Enter the system administrator’s e-mail address.
This address is used as the sender's address of alert e-mail messages sent
from this printer. Can contain up to 64 characters.
Server Timeout
(seconds)
Enter the number of seconds the printer waits before considering an SMTP
operation to have timed out (1 to 999).
Configuring the POP3 Settings
Click the [POP3] tab on the network settings page to configure the POP3 settings.
POP3 Settings
Item Description
POP3 Server Enter the IP address or host name of the POP3 server for authentication. The
POP3 server specified here will be used for [POP before SMTP]. Can
contain up to 64 characters.
User Account Enter the user name for logging in to the POP3 server. Can contain up to 32
characters.
User Password Enter the password for logging in to the POP3 server. Can contain up to 32
characters.
Authentication Select an authentication method from the following:
[None]: Password will not be encrypted.
[APOP Authentication]: Password will be encrypted.
[Auto]: Password will be encrypted or not encrypted according to the POP3
server's settings.
5. Monitoring and Configuring the Printer
84