• For details about [IPv6], see p.56 "Host Interface Menu Parameters".
Configuring the Network Application Settings
Click the [Network Application] tab on the network settings page to configure the network application
settings.
Network Print Setting
Item Description
IPP Select to enable network printing using Internet Print Protocol (via TCP port
631/80).
FTP Select to enable network printing using an embedded FTP server in the
printer (via TCP port 20/21).
RAW Select to enable network raw printing.
Port No. Enter the TCP port number to use for raw printing. The valid range is 1024
to 65535, except 53550 and 49999 (default is 9100).
LPR Select to enable network printing using LPR/LPD (via TCP port 515).
mDNS Setting
Item Description
mDNS Select to enable Multicast DNS (via UDP port 5353). If disabled, the item
below cannot be configured.
Printer Name Enter the name of the printer. Can contain up to 32 characters.
Configuring the Network Settings
79
To Next Page
Loading...
