Item Description
Back up IPsec Settings Backs up the IP security settings to a file.
Follow the procedure below to create configuration backup files.
1. Select the radio button for the type of data you wish to back up.
2. Enter the administrator password if required.
3. Click [OK].
4. Select [Save] or [Save as] from the dropdown list at the bottom of the Window.
5. The backup file is stored in the default folder if choosing [Save]. Navigate to the location
to save the backup file if choosing [Save as] and proceed to the next step.
6. Specify a name for the file, and click [Save].
• [Back up IPsec Settings] appears only when a password is specified in [Administrator].
Restoring the Printer's Settings from a Backup File
Click the [Restore Setting] tab on the administrator settings page to restore the printer's settings from a
previously created backup file.
• When the printer is returned from repair, it is important that you restore the printer's settings from the
backup files. The printer's settings are returned to the default after repair.
Restore Setting
Item Description
File to Restore Enter the path and name of the file to restore, or click [Browse...] to select
the file.
Follow the procedure below to restore configuration backup files.
5. Monitoring and Configuring the Printer
94
To Next Page
Loading...
