Bypass Tray
Paper types
Plain Paper, Thick Paper, Letterhead, Label Paper, Special Paper,
Preprinted Paper, Color Paper, Recycled Paper, OHP (Transparency),
Envelope
Paper sizes requiring manual
settings
The following sizes are supported, but they must be selected using the
control panel. For details about paper size settings, see p.135
"Specifying standard size paper for the bypass tray".
A4 , A5 , A6 , B5 JIS , B6 , 8
1
/
2
" × 14 " (Legal) , 8
1
/
2
"
× 13 " (Foolscap) , 8
1
/
2
" × 11 " (Letter) , 8
1
/
4
" × 13 " (Folio)
, 8 " × 13 " (F/GL) , 7
1
/
4
" × 10
1
/
2
" (Executive) , 5
1
/
2
" × 8
1
/
2
" (Half Letter) , 4
1
/
8
" × 9
1
/
2
" (Com 10) , 3
7
/
8
" × 7
1
/
2
" (Monarch) , C5 Env. , C6 Env. , DL Env. ,16K , Custom Size
Custom paper size
The following custom sizes are supported, but they must be selected
using the control panel. For details about custom size paper settings,
see p.136 "Specifying custom size paper for the bypass tray".
• Approximately 64 - 216 mm (2.52 - 8.50 inches) in width
• Approximately 139.7 - 432 mm (5.50 - 17.00 inches) in length
Paper weight 60 to 162 g/m
2
(16 to 43 lb.)
Paper capacity
100 sheets (80 g/m
2
, 20 lb.)
Do not load the paper so that the top of the stack exceeds the paper
guides on the bypass tray.
Envelope Feeder
Paper types Envelope
Paper sizes requiring manual
settings
The following sizes are supported, but they must be selected using the
control panel. For details about paper size settings, see p.146
"Loading Envelopes into the Envelope Feeder Unit".
4
1
/
8
" × 9
1
/
2
" (Com 10) , 3
7
/
8
" × 7
1
/
2
" (Monarch) , C5 Env.
, C6 Env. , DL Env.
Paper weight 60 to 130 g/m
2
(16 to 35 lb.)
Supported Paper for Each Tray
113
To Next Page
Loading...
