Ricoh Aficio SP 4310N - Installing the Memory Expansion Units; Installing the Hard Disk

Installing the Memory Expansion Units
• Do not touch the inside of the controller board compartment. Doing so may cause a machine
malfunction or a burn.
Installing the Hard Disk
• Before touching the hard disk, touch something metal to discharge any static electricity. Static electricity
can damage the hard disk.
• Do not subject the hard disk to physical shocks.
1. Check the package contains the following:
CEC015
1. Hard disk
2. Screws
2. Turn off the power to the printer, and then unplug the power cable and interface cable.
3. Remove the two screws holding the controller board in place.
CEE137
The removed screws are required to fasten the controller board.
3. Installing Options
56
3