Replacing the Paper Feed Roller
Replace all feed rollers the feed rollers for the printer and the optional paper feed unit(s). The following
procedure shows how to replace the paper feed rollers for the printer and the optional paper feed units.
• When lifting the machine, use the inset grips on both sides. Otherwise the printer could break or
cause injury if dropped.
• When lifting the paper feed unit, hold the bottom of it, and then lift it slowly. Lifting it carelessly or
dropping it may cause an injury.
• Always move the printer horizontally. Turning the printer sideways or tilting it backward or forward
while moving will result in toner leakage.
• Do not put the printer on an unstable or sloping surface.
• Be sure to move the printer horizontally. Moving the printer up and down may cause toner to scatter.
1. Lift the paper tray slightly, and then pull it out until it stops.
To Next Page
Loading...
