When you press a number key repeatedly, the character changes in the order indicated above the key you are
pressing.
6. [Clear] Key
Deletes the character at the cursor position. You can delete a character at the far right side of a line even if the
cursor is placed to the right of the character.
How to Enter Characters
Use the following procedure to enter text in the text input screen. ("User#2" is the text entered in this
example.)
1. Press [ab/AB/12] to change the input mode to uppercase.
2. Press the [8 TUV] two more times, and then press the [ ] key. A letter "U" is entered.
3. Press [ab/AB/12] two more times to change the input mode to lowercase.
4. Press the [7 PQRS] key four times, and then press the [ ] key. A letter "s" is entered.
Entering Characters
25
To Next Page
Loading...
