Loading Paper onto Bypass Tray
• Shuffle paper before loading the stack onto the tray, so multiple sheets are not fed in together.
• Set the size and direction of the loaded paper on the control panel or in the printer driver. Make sure
the settings do not conflict. Otherwise, the paper may jam or the print quality may be affected.
• Load paper with the print side up.
• Specify the paper size and type using the control panel. This printer does not automatically detect the
size of paper loaded in a bypass tray. Make sure the paper size and type is selected using the control
panel.
• During printing, do not open or close the printer covers or bypass tray, or pull out or push in the paper
tray.
1. Press the mark in the center of the Bypass Tray.
To Next Page
Loading...
