2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Type: (tray name)], and then press the [OK] key.
In the illustration below, [Paper Type:Tray 1] is selected for Tray 1.
4. Press the [ ] or [ ] key to select the paper type that is loaded, and then press the [OK]
key.
About two seconds later, the display returns to the Paper Input screen.
5. Press the [Menu] key to return to the initial screen.
• If the printing result is badly smudged, change the setting on the printer's control panel. For details,
see p.111 "Supported Paper for Each Tray".
6. Loading Paper
132
To Next Page
Loading...
