2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Size:Bypass Tray], and then press the [OK] key.
4. Select the envelope type using the scroll keys, and then press the [OK] key.
5. Press the [Menu] key.
• After specifying the paper size, specify a paper type such as [Envelope] using the control panel or
printer driver. For details on specifying a paper type using the control panel, see p.138 "Specifying
a paper type for the bypass tray".
• For details about the printer driver, see the printer driver Help.
Loading Envelopes into the Envelope Feeder Unit
The following explanation uses the example of installing the envelope feeder unit in "Tray 2".
6. Loading Paper
146
To Next Page
Loading...
