Attaching the Envelope Feeder
• Pull out only one paper tray at a time. Having multiple paper trays fully extended could cause the
printer to fall over.
• The printer can accommodate two optional paper feed units. The envelope feeder can be used with
"Tray 2" and "Tray 3". The main unit's feed tray (Tray 1) cannot be used for this purpose.
This section describes the procedure to install the envelope feeder unit using Tray 2 as an example.
1. Check the package contains the following:
2. Pull out the optional paper tray (Tray 2) from the optional paper feed unit until it stops. Then
lift the front slightly and pull it out completely.
To Next Page
Loading...
