Ricoh Aficio SP 4310N - Supported Paper Types; Plain Paper; Thick Paper

Supported Paper Types
The tables in this section provide details of the paper types supported by this printer. Use these tables when
specifying a tray's paper settings and take note of the information under "Note".
Plain Paper
Paper weight 60 to 130 g/m
2
(16 to 35 lb.)
Paper type setting using the
control panel
The [Menu] key > [Paper Input] > [Paper Type: (tray name)] > [No
Display (Plain Paper)] > the [OK] key
Paper type setting using the
printer driver
[Plain & Recycled] or [Plain (60 to 130 g/m2)]
Supported input tray Any input tray can be used.
Duplex printing Supported
Note
• Tray 1: 500
• Tray 2 (Paper feed unit): 500
• Tray 3 (Paper feed unit): 500
• Bypass Tray: 100
Thick Paper
Paper weight 131 to 162 g/m
2
(35 to 43 lb.)
Paper type setting using the
control panel
The [Menu] key > [Paper Input] > [Paper Type: (tray name)] > [Thick
Paper] > the [OK] key
Paper type setting using the
printer driver
[Thick (131 to 162 g/m2)]
Supported input tray Any input tray can be used.
Duplex printing Not supported
Note Printing is slightly slower than when using plain paper.
Supported Paper Types
115
6