9. If you extended the tray in Step 3, pull the bottom of the paper tray cover ( ) up slowly,
and then remove the paper tray cover ( ),as shown in the illustration.
To avoid paper jams, make sure the tray is securely inserted.
• You cannot load paper smaller than A4 , if the tray is extended. In this case, return the tray to its
standard length.
Specifying standard size paper for a standard or optional paper feed tray
• If you want to use the paper size and feed direction that are not indicated on the paper size dial, set
the dial to " ". In this case, you should set the paper size using the control panel. Follow the procedure
described below to set the paper size.
6. Loading Paper
128
To Next Page
Loading...
