5. Control Panel
Contains keys for printer control and a display that shows the printer status.
6. Tray Extension
Pull this out if the paper you are loading is longer than B5.
7. Standard Tray
Prints are delivered here printed side facing down.
8. Paper Exit Cover
Open this cover to remove jammed paper.
9. Vents
To prevent overheating, heat from internal components is released through these vents. Malfunctions and failure
can result if these vents are blocked or obstructed.
10. Front Cover Release Button
Press this to open the front cover.
11. Power Switch
Press this to turn the printer's power on and off.
12. Friction Pad
This ensures only one sheet of paper is fed in at a time. If multi-sheet feeds occur, clean the friction pad carefully.
If the message "Replacmnt Requrd:Maint. Kit" is displayed, replace the friction pad with a new one.
1. Guide to the Printer
16
To Next Page
Loading...
