Ricoh feeder - Pausing Copy When Using Finisher

Adding paper, Toner and Staples
86
5
Pausing Copy When Using Finisher
You can pause a large volume of copies when using Finisher.
A Press the {Suspend/Resume} key.
The key lights up.
B Remove the stack of paper from the finisher shift tray.
C Press the {Suspend/Resume} key.
The key turns off, and then copying restarts.
Note
❒ You can suspend copy only when the output tray is specified as the finish-
er shift tray.
ANQ082S
ANQ083S