Ricoh FF-1 - Setting Focus Distance; Viewing and Composing Shots; Unloading Film from Camera

* No flash bulb can be used with this camera.
* The Hot shoe is only designed for an electronic
flash and no other accessories can be used.
SETTING THE DISTANCE
1. Measure the camera-to-subject distance in meters
with your eyes.
2. Rotate Distance Scale Ring (10) until the
nu mber
or
in-between number corresponding to the
measured distance is opposite the index line.
METER/ FEET CONVERSION TABLE
Meter 0.9
1.5 0 2.5
5.0
Foe. 3.0
5.0 8.2 16.4
Tips for Better Results
* When you take pictures by merely pressing Shutter
Release Button (7)
without adjusting exposures
and distances. To do
so , simply set Distance Scale
Ring (10) at, the green "0 " mark, Auto / Manual
Ring (11) at the green "A " (Auto) (Fig. 18).
VIEWING
1. Look into viewfinder Eyepiece (13) and compose
your picture inside the bright frame line (Fig. 19).
UNLOADING FILM
1. Press Film Rewind Release Button (25) (Fig. 20).
-9-