2. Lift up Film Rewind Crank (2) and
turn
it
clockwise
until you feel the film tension released (Fig. 21).
3. Open Back Cover (28) by pulling Back Cover Latch
(20)
.
4. Pull
out
Film Rewind Knob (1) all the
way
, remove
the film cartridge and have the
film
processed
as
soon
as
possible.
Tips
for
Better
Results
* Always unload your camera in the shade
or
in a
poorly-lit place, never
in
direct sunlight or other
bright light.
* When you reach the end
of
the roll film, Film
Advance Lever (12)
will
tighten and refuse to
advance.
If
this happens, do
not
advance Film
Advance Lever (12) by force for
"Just
one more
shot". otherwise the
film
will
be torn
out
of
the
cartridge.
* Film Rewind Release Button (25) will remain
in
place once it is pressed, and return automatically
to
its original position when
Fil
m Advance Lever (12)
is advanced.
* Keep
your
fingers
away
from
Film
Rewind
Release
Button
(25)
while
taking
pictures
to
prevent
from
double
exposed
pictures
.
-
10
-
To Next Page
Loading...
