Ricoh IM 600SRF Field Service Manual

8.Smart Operation Panel G2.5
723
System Maintenance
Maintenance Modes
Service program (SP) modes for the Smart Operation Panel are as follows:
Mode
Use
Notes
SP Mode (MFP)
SP modes for the MFP
(controller, engine)
The numeric keys are required to enter this
mode. Display the application where soft keys
are displayed or the soft keys of the SP mode.
Service mode
(operation
panel)
SP modes for the Smart
Operation Panel.
• Changing SP mode settings
in the Screen Features
Settings menu.
• Installing and updating
applications that can be
installed
Same as above
Recovery mode
Maintenance modes for the
Android OS
• Updating firmware
• Updating Keymicon
-
Login to/Logout from Control Panel Service Mode
Login
In the same way as you log in to the SP Mode on the MFP, you use the soft keys to enter a combination
of numbers in order to login to the service mode of the control panel.
• You cannot log in to the service mode of the control panel when one of the following screens is
displayed.
• Stop All Jobs
• Settings
• Address Book Management
Use the numeric keys on one of the following screens.
• Soft keys on the application screen where soft keys appear
• Soft keys for the control panel’s service mode (displayed by pressing both the [EX3] key and
[Check Status] at the same time)
• To exit the soft keys, press [EXIT] on the screen.

Ricoh IM 600SRF Specifications

General

Brand	Ricoh
Model	IM 600SRF
Category	All in One Printer
Language	English