See "Supported Output Trays" about the output tray for the printed paper.
6. Front cover
Open to replace the toner cartridge.
page197”Replacing the Toner”
7. Paper trays (Trays 1–2)
Standard paper trays. Load paper here.
page76”Loading Paper into the Paper Tray”
8. Lower paper trays
Optional paper trays. Load paper here.
page76”Loading Paper into the Paper Tray”
9. Front lower cover
Open to replace the waste toner bottle.
page202”Replacing the Waste Toner Bottle”
10. Vents
Prevent overheating.
After large-volume printing, the ventilation fan may continue to work to lower the
temperature inside the machine.
11. Internal tray guide
Open the guide to prevent the printed paper from falling off.
• When using paper holders, always follow the precautions below.
• Be sure not to place objects in front of the paper holders. Doing so may cause
paper jams.
• After pulling out copied/printed paper, do not put it back under the paper
holders. Doing so may result in malfunction and paper jams.
To Next Page
Loading...
