Ricoh IM C6010 - Specifying a Custom Size Paper Using the Control Panel

1. Introduction and Basic Operations
90
1
6. Choose one paper size from the list shown, and then press [OK].
7. Press [OK].
8. After completing the configuration, press [Home] ( ).
To use paper that can be detected automatically after using paper that cannot be
detected automatically, restore the setting of Auto Detect. To restore the setting of
Auto Detect, load the paper again, operate steps 1 to 5, select [Auto Detect], and
then press [OK].
Specifying a Custom Size Paper Using the Control Panel
1. Press [Settings] on the Home screen.
2. Press [Tray/Paper Settings].
3. Press [Paper Size/Paper Type].
4. Press one tray to set.