• When folding prints, toner in the folds will come off.
• If the prints are stored in the conditions described below, toner may melt:
• When a print and a half-dried print are put on top of each other
• When solvent-type adhesive agents are used for pasting prints
• When prints are placed on mats made of chlorinated plastic in locations of high
temperature for long periods of time
• When prints are placed in locations of extremely high temperatures, such as
near a heater
Thick Paper Orientation and Recommended Status
When loading thick paper of 106-300 g/m
2
(Approx. 28 lb. Bond–110 lb. Cover) in the
paper trays, or in the bypass tray, follow the recommendations below to prevent
misfeeds and loss of image quality.
Paper Orientation
Thick paper has a paper direction according to its grain. Set the paper direction
according to the grain, as shown in the following diagram:
Paper Storage
• Temperature: 20–25°C (68–77°F)
• Humidity: 30–65%.
Do not use together paper that has been stored in different environments.
To Next Page
Loading...
