Tray 1 can hold A4 portrait paper only. If you want to print on A5, B5 JIS, or 8
1
/
2
× 11
portrait paper from Tray 1, contact your service representative.
(mainly North America)
Tray 1 can hold 8
1
/
2
× 11 portrait paper only. If you want to print on A4, A5, or B5 JIS
portrait paper from Tray 1, contact your service representative.
• Tray 1 does not have the auto detect function for the paper size. On the control
panel, specify the paper size to use.
page88”Specifying the Paper Size That Is Not Automatically Detected”
• Do not stack paper over the limit mark. If you load paper over the limit mark, the
printed images may become slanted or a paper jam may occur.
Load paper into every tray in the same way. In the following example procedure, Tray 2 is
used.
1. Check that paper in the paper tray is not being used, and then pull the tray out
carefully.
2. Remove paper if loaded.
3. While pressing the release lever of the side fence, slide the side fences outward.
To Next Page
Loading...
