4. Press [Destinations] tab [Fax].
5. Specify the Fax Destinations and send conditions.
• Select Line: Select the line to use.
• Fax Destination: Register the fax destination.
• International Transmission Mode: Specify whether to reduce errors occurring
when sending abroad.
• Fax Header: Select the name of the sender printed on the reception sheet of the
destination. Register the fax header in advance.
See "Printing the Destination Name, Fax Header, and Standard Message on the
Fax Received at the Destination", User Guide (HTML).
• Label Insertion: Specify the name (title + name) and fixed phrase printed on the
reception sheet of the destination.
See "Printing the Destination Name, Fax Header, and Standard Message on the
Fax Received at the Destination", User Guide (HTML).
• Advanced Feature: Register SUB code or SEP code.
6. Press the [User Management / Other] tab as necessary, and specify the settings.
• User Management: Enter the authentication information to login and use the
machine.
• Add to Group: Select a group to which this destination belongs as necessary.
Register the group in advance.
See "Registering/Changing/Deleting Groups in the Address Book", User Guide
(HTML).
• Display Priority: When the destinations are sorted in the order of priority, a
destination with higher priority is displayed prior to that with lower priority. The
destinations with the same priority are displayed in the order of registration.
• Destination Protection: Select this check box to require entering of the
protection code to select the destination.
See "Using the Protection Function to Prevent the Misuse of Addresses", User
Guide (HTML).
To Next Page
Loading...
