Message Causes Solutions
"Please wait." The destination list is being
updated from the network
using Web Image Monitor.
Wait until the message disappears. Do
not switch off the power while this
message is displayed. Depending on the
number of destinations to be updated,
there may be some delay before you
can resume operation. Operations are
not possible while this message is
displayed.
"Please wait." The main power has just been
turned on, paper type (plain
paper/ translucent paper/
film) was changed, or the
machine is otherwise getting
ready.
Wait for the machine to fully warm-up.
When "Scanning originals can be
started." and "Select copy mode and
Place original." are displayed
alternately, you
can make the settings for
your copies and scan your originals.
After the originals have been scanned,
the machine will automatically start
copying after it has warmed-up.
"Rotate Sort is not available
with this paper size. Select
another paper size or cancel
Rotate Sort mode."
The rotate sort function does
not support the size of the
scanned original.
Select the paper size that can be used
for rotate
sort function. For details about
rotate sort function, See "Sort", Copy
and Document Server Reference
.
"The selected file(s)
contained file(s) without
access privileges.
Only file(s)
with access privileges will be
deleted."
You have tried to delete files
without the
authority to do so.
Files can be deleted by the person who
created the file. To delete a file which
you are
not authorized to delete, contact
the person who created the file.
"You do not have the
privileges to
use this function."
The logged in user name does
not have permission for the
selected function.
Contact the administrator about the
permission for the required function.
• p.16 "When You Have Problems Operating the Machine"
Messages Displayed When Using the Copy/Document Server Function
25
To Next Page
Loading...
