Ricoh LW426 - Page 67

Message Causes Solutions
"Exceeded max. data
capacity. Set Original
Orientation to "R" then press
the Start key again."
The scanned original was too
large, or its orientation was
not correct.
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution.
Re-loading the original in a different
orientation may enable the machine to
scan large originals.
See "Relationship between Resolution
and Scan Size", Scanner Reference .
"Exceeded max. number of
alphanumeric characters for
the path."
The maximum number of
specifiable alphanumeric
characters in
a path has been
exceeded.
The maximum number of characters
which can
be entered for the path is 256.
Check the number of characters you
entered, and then enter the path again.
"Exceeded max. number of
alphanumeric characters."
The maximum enterable
number of alphanumeric
characters has been
exceeded.
Check the maximum number of
characters which can be entered, and
then enter it again. See "Values of
Various Set Items for Transmission/
Storage/Delivery Function", Scanner
Reference .
"Exceeded max. number of
files which can be sent at the
same time. Reduce the
number of the selected files."
The number of files exceeded
the maximum number
possible.
Reduce the number of files, and then
send them again.
"Exceeded max. number of
files which can be used in
Document Server
at the same
time."
The maximum number of files
that can be stored in the
Document Server has been
exceeded.
Check the files stored by the other
functions, and then delete unneeded
files. For details about how to delete
files, see
"Deleting a Stored Document",
Copy and Document Server Reference
.
"Exceeded max. number of
pages per file. Do you want
to store
the scanned pages as
1 file?"
The file being stored has
exceeded the maximum
number of pages for one file.
Specify whether to store the data or not.
Scan the pages that were not scanned,
and then store them as a new file. See
"Storing Files Using the Scanner
Function", Scanner Reference .
Messages Displayed When Using the Scanner Function
65
4